Radwag WLC F1 Precision Balances

Availability: In Stock / Short Lead Time
£416.00

Precision balances enable fast and accurate determination of mass in laboratories and industry. The devices are equipped with RS232 connector and an internal battery. Stainless steel weighing pan, backlit LCD display. 

Readability [d]: 0.01g - 2g
Maximum capacity [Max]: 1kg - 120kg

Radwag WLC Precision Balance

Precision balances enable fast and accurate determination of mass in laboratories and industry. The devices are equipped with RS232 connector and an internal battery which allows their operation in places where there is no access to the mains (230V). The balance features a stainless steel weighing pan, and a backlit LCD guaranteeing clear weighing result presentation. Optionally, they can be equipped with an additional RS232 connector.
 
Note: The difference between the K and R models is that the indicator on the K model is fixed with a longer wire so this can be found on a desk/wall. R model the indicator it fixed in place to the base. (See Photos) 
 

Model

Weighing capacity (kg)

Division (g)

WLC 6/F1/R 6 0,1
WLC 6/F1/K 6 0,1
WLC 12/F1/R 12 0,2
WLC 12/F1/K 12 0,2
WLC 30/F1/R 30 0,5
WLC 30/F1/K 30 0,5
WLC 6/12/F1/R 6 / 12 0,1 / 0,2
WLC 6/12/F1/K  6 / 12 0,1 / 0,2
WLC 12/30/F1/R 12 / 30 0,2 / 0,5
WLC 12/30/F1/K 12 / 30 0,2 / 0,5

 

Communication interfaces: 2×RS232, USB type A, USB type B. The interfaces enable cooperation with peripheral devices, e.g. printer, computer, USB flash drive, additional display. The WLC balances feature real-time clock and ALIBI memory. Optionally, they can be equipped with 4 IN / 4 OUT.

 
 
Levelling system

manual

 

Display

LCD (backlit)

 

Weighing pan dimensions

300×300 mm

Packaging dimensions

570×390×170 mm

Net weight

5.2 kg

Gross weight

6 kg

Protection class

IP 43

 

Communication interface

RS232

 

Power supply

100 — 240 V AC 50/60 Hz and battery

 

The operation time on batteries

10 h (average time)

 

Operating temperature

+15 — +30 °C

Relative humidity

10% — 85% RH no condensation

Plus / Minus Control 

Control of sample mass is carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. Graphic visualisation of weighing results is displayed in a form of a bar graph.

Percentage Weighing 

Percent Weighing function is used for comparison of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.

Totalizing 

Function adding new mass value to already obtained one. This allows determining mass content of the mixture, being a composition of a number of different consistence components. Totalizing is limited by the maximum capacity parameter.

Parts Counting 

Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supported by a mechanism of Automatic Correction of Accuracy. This allows updating single item mass in course of the process. To a certain extent, Automatic Correction of Accuracy eliminates errors that may be a result of different mass values of seemingly alike single elements. For industry solutions item counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature an audio signalling base informing that a specified number of items has been weighed. It is possible to apply weighing systems using a few platforms of different MAX capacities and different accuracies.

Internal Battery 

Internal and rechargeable battery of SLA 6 V type (sealed lead acid) enables device operation without connecting the device to the mains (9h operation). The weighing instrument controls battery status and displays a respective pictogram on the screen.

Peak Hold

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Accessories
More from Radwag